-40%
*OPEN BOX* 33' 2

*OPEN BOX* 33' 2" Telescoping Mast - Antenna Push Up Pole -Easy Up EZ-TM-50-U-95

$ 113.52

Availability: 100 in stock
  • Brand: Easy-Up
  • Compatible Brand: Channel Master, ROHN
  • MPN: EZTM50
  • Country/Region of Manufacture: United States
  • Refund will be given as: Money Back
  • Return shipping will be paid by: Seller
  • Restocking Fee: No
  • Type: Telescoping Mast / Telescopic Mast
  • Item must be returned within: 30 Days
  • Country of Manufacture: United States
  • All returns accepted: Returns Accepted
  • Model: EZ TM 50-U-95
  • Condition: This is a customer return. Blemishes from an attempted install. Tubing has scratches and blemishes from sections being telescoped out and fastened down.

    Description

    EASY UP EZ TM-50-U-95 TELESCOPING MAST
    This is a customer return. Blemishes from an attempted install. Tubing has  scratches and blemishes from sections being telescoped out and fastened down.
    *Ships via UPS/FedEx Ground*
    Genuine Easy Up Product - Made in the USA
    Perfect for mounting antennas for TV, Ham Radio, WIFI, Scanner, etc
    Use in guyed or bracketed installations
    33' 2" assembled height
    Mast hardware included
    5 Sections of heavy duty galvanized tubing
    Features 5 guy rings that rotate
    Features a heavy duty thumbscrew/collar system for setting height
    Weighs 45 lbs
    Shipping Length: 95"
    Mast Section Dimensions:
    Bottom: 2-1/4" OD x 18 Gauge x 74" Long
    2nd Section: 2" OD x 18 Gauge x 80" Long
    3rd Section: 1-3/4" OD x 18 Gauge x 86" Long
    4th Section: 1-1/2" OD x 18 Gauge x 92" Long
    Top: 1-1/4" OD x 16 Gauge x 94" Long
    Masting is overlapped for added strength and stability.
    NOTE: GUYS, GUY HARDWARE, ANCHORS, AND MOUNT ARE NOT INCLUDED. SEE OUR STORE.
    *
    *
    *
    EASY UP PRODUCTS ARE PROUDLY MADE IN THE USA
    *
    *
    *
    Contact with a power line can KILL you. Choose a safe installation site.
    Mast must be guyed approximately every 9' at the top of each piece of tubing with the distance from the base of the mast to the anchor equal to the height of the mast attachment point.
    Anchors should be spaced every 120" if three guy directions are used, or every 90" if four guy directions are used.
    The base and all anchors must be properly grounded.
    Antenna load should not exceed 2 sq ft of surface area
    Do not attempt installation or dismantling if there is any wind or on a wet day
    Tie off mast with rope (non metal) to deflect away from power line if it should fall during installation or dismantling
    Use adequate and skilled help in working with this product and have an experience supervisor
    If you are in doubt as to the proper use or method of installation or dismantling, contact an experienced installer and your local electrical utility for assistance.